|
The FTM-10E is Yaesu's latest mobile 2m/70cm radio which incorporates Bluetooth (using the optional BU-1 board), enabling hand and wire free connectivity between the rig and the user via an optional Bluetooth headset.
Not only does it cover 2m and 70cm but also has a wide band receiver that covers 0.5 to 1.8MHz (Medium Wave), 76 to 108MHz VHF stereo broadcast, it also covers 108 to 222MHz (Airband) and 300 to 1000MHz.
The versatile memory system uses up to 500 memory channels. Each memory channel can be labeled with an 8-digit alphanumeric tag. The memory channels may be recalled by a specific operating band, if desired.
Enjoy your FTM-10E outdoor with your motorcycle, bike etc anywhere! The commercial grade front panel meets the IP57 standard. (Waterproof at 3 feet (1 m) for 30 minutes, and protection against dust.) All connectors are also waterproof.
Note that the microphone and PTT button are built into the front panel. Hand microphone not supplied.
The Bluetooth adaptor and Bluetooth headset are optional extras. (Specifications are subject to change without notice)
High power output of 50W on 2m and 40W on 70cm, with three adjustable power levels (50/40W, 20/20W, 5/5W).
Specifications:
- Channel Steps: 5/6.25/8.33*/10/12.5/15/20/25/50/100/200 kHz *AM Only
- Emission Type: F3E, F2D
- Antenna Impedance: 50 Ohms
- Frequency Stability: ± 5 ppm @ 14° F ~ +140° F (–10° C ~ +60° C)
- Operating Temperature Range: –4° F ~ +140° F (–20° C ~ +60° C)
- Supply Voltage: Nominal: 13.8 V DC, Negative Ground
- Operating: 11.7 ~ 15.8 V, Negative Ground
- Current Consumption: RX: 0.5 A (Receive) (Approx.) 8.3 A / 6 A / 2A (TX, 2 m 50W / 20 W / 5 W) 8.5 A / 6 A / 2A (TX, 70 cm 40W / 20 W / 5 W)
- Case Size (W x H x D): 4.4" x 1.5" x 7" (112 x 37.6 x 178 mm) (w/o knobs & connectors)
- Weight (Approx.): 2.9 lb. (1.3 kg)
|
